|
>>
|
No. 8311
>>8310
циана = сиреневый
ну фон в тайлсетах жеж
я щитаю его надо заменить во всех этих самых тайлсетах на прозрачный.
или
в конфиге поковырять эти три настройки
[GRAPHICS_BLACK_SPACE:YES]
These settings can have a significant impact on frame rate, especially for people that have slow frame rates on the title screen. Available modes are 2D, 2DHW, 2DASYNC, STANDARD, PARTIAL:<number>, ACCUM_BUFFER, FRAME_BUFFER and VBO. The number after PARTIAL refers to how many frames it will redo a printed tile before skipping it, so you might try increasing it a bit if you have flickering when PARTIAL is set. Please note that any of these combinations might cause frame rates to drop significantly or cause unpleasant side effects like flickering.
By and large, 2D should be the most reliable, while STANDARD has a good combination of speed and reliability. However, all 2D modes are normally far slower than even STANDARD, which may be the slowest 3D mode.
If you have a multi-core machine, 2DASYNC should be faster than 2D, and just as reliable. On a single-core it's slower. 2DHW should also be faster than 2D, but depends on having lots of video memory.
[PRINT_MODE:STANDARD]
[SINGLE_BUFFER:NO]
самому неинтересно играю в аски привык
а также, по ссылке на форуме написано что адвенчур пока бажный
кто там котов плодил отзовись как со стабильностью?
8299-ый
|